TURNING CENTER

(1) Hitachi Seiki CNC Lathe, Max Machine Diameter 9.4", Max Machine Length 15.0", Spindle Bore 2.5".

MILLING CENTERS

(2) Matsura 500 VS CNC Milling Centers with 10,000 RPM cooled spindles.
X-AXIS =20.0", Y-AXIS=14.1" Z-AXIS=17.7"
Table base 34.0" x 15.0"

(1) Matsura 800V CNC Milling Center 6,000 RPM cooled spindle.
X-AXIS=31.5", Y-AXIS=18.1", Z-AXIS=200"
Table base 46.0" x 18.1"

WELD

(1) Tungsten inert gas (TIG) Miller Synchrowave 350 SD AC/DC
(1) Tungsten inert gas (TIG) Miller Synchrowave 180 SD AC/DC
(1) Metal inert gas (MIG) Millermatic 250 wire feed
(1)Plasma Cutter - Thermal Dynamics Pak Master 38 XL
(1) Oxy-Acetalene Weld and cutting
(1) Pressure test tank and fixturing

INSPECTION

(1)Checkmaster surface plate 96" X 48" X 14" (GRADE AA)
(1) Mitutoyo surface plate 36" x 36" x 5" (GRADE A)
(1) Mitutoyo Height Gage 24"
(1) Starrett Height Gage 12"
(1)Mitutoyo 4pc. digital micrometer set 0" to 4" with SPC connections
(1) Mahr/feinruf system MU-Checker with comparator stand .00005" accy.
(1) Brown & Sharp 12" calipers (1) Prestige 12" caliper w/groove tool attachment, (4) calipers 6" Misc.
(1) Mitutoyo depth mic. set with interchangeable rods
(2) Mahr Millitron electronic indicators with .000005" accy.
(1) Mitutoyo gage block set, Grade 2
(1) Mitutoyo 0" - 12" micrometer set with rod standards
(A) Deltronic gage pins and standard ref. gage pin sets .010" - 1.00"
(B) Large selection of certified thread gages 450ct.
(C) Electro-chemical etch station for part marking and identification
(D) Environmental controls for temperature, humidity and dust with circular chart graph recorder
(E) Inspection aids, V-blocks, angle plate, precision cones, parallel bars, cubes, rectangles, etc.

SUPPORT EQUIPMENT

(F) Well's manual mill, Horizontal bandsaw, 20 ton press, Drill press, Grinders, Sanders, Deburr wheel, vertical bandsaw, helicoil insert and extract tools, hand finish tools
(G) Manual Lathe Mighty Turn MI-1840G